India's No-1 Dealer for CNG Kits Fitting in Car & Heavy Vehicle, CNG Cylinder Testing.

  1. Product Description
  2. Technical Materials


The AC R02 TWIN single-stage dual power reducer is designed for car sequential injection systems. The device is used to reduce the pressure of liquid LPG flowing from the tank and turn it into a gas phase (vaporisation).

Thermal insulation system

Reducer features include compact size and unique design comprising 4 aluminium castings and 2 covers made in the ACtherm system preventing gas cooling, thus, providing excellent thermal insulation. Due to its unique design, the AC R02 TWIN heats up very quickly, so switching to gas is also performed quickly. Therefore, no additional work of the controller, such as temperature correction, is required. Its high thermal efficiency and resistance to LPG contamination makes the reducer the best option when selecting autogas system components.

Pressure stabilizing system

The AC R02 TWIN reducer is equipped with the unique ACPress system that provides constant pressure  supplying injector rails in various road conditions. It should be also noted that stability is guaranteed regardless of inlet pressure at the gas cylinder.

Universal mounting system

It is quite new that the unit is fixed with a single bolt, enabling the reducer to be installed practically in any position. Reducer versatility is complemented with the  TriACflex elbow connector system that can be configured in any arrangement.
An elbow arrangement may be shown here with a caption: straight pipe connector, 90 and 60 degree elbows.

  • small dimensions,
  • compact design,
  • excellent thermal efficiency,
  • stable adjustments,
  • resistance to LPG contamination,
  • stable feeding independent of gas cylinder inlet pressure,
  • low pressure drops at high loads,
  • mounting with a single bolt,
  • elbow connector system.
Standards and approvals

STAG R02 TWIN reducer has been approved under E8 approval No. 67R-01 6865 and meets the requirements of UNECE Regulation No. 67.


images Technical specification
Material 4 aluminium castings
and 2 covers
made of plastic
Weight [kg] Reducer – 1520g
Complete kit – 1840
Dimensions [mm] 162 x 141 x 129
Max. inlet pressure 30 bar
Outlet pressure Adjustable
0.9–1.5 bar
Solenoid valve power supply 12VDC
Coil power 11W
Solenoid valve Gniazdo AMP
Gas inlet diameter [mm] ∅ 8.0 M12x1
Gas outlet diameter [mm] ∅12
Water outlet diameter [mm] ∅16
Maximum engine power 206kW/ 280KM
Approval 67 R – 01 6865
Vacuum pipe [mm] ∅4

Request Callback