AC W02 works perfectly in spite of the driving style and engine load.
Advantages of W02 injectors:
Compared to the previous version of AC W01 injector, AC W02 has been redesigned to ensure the best injection times in any conditions by the use of specially selected materials, as well as a light and simple construction which allows easier installation. AC W02 has been designed so that it can be easily used to replace W01 in the existing systems. Additionally, the system of connecting the components brings greater configuration The structure also offers the installation of the integrated gas temperature and pressure sensor PS-04 with low inertia of the response to gas temperature changes on any side and with 360˚ turning functionality even when installed on the injector.
W02 responds quickly to even minimum and transient load changes due to the excellent opening and closing characteristics. The minimum number of components and a plastic body make it light and simple.
1. ACW02 injector rail with a direct connection of the PS04 sensor allowing sensor turning to adjust its position and ensure precise measurements of pressure and temperature.
2. ACW02 injector rail with the PS04 sensor installed on the feeding line, using a T-connector.
|Gas flow through section at 1.2 bar [l/min]||125|
|Max. section performance at 1.2 bar pressure [kW/hps]||33 / 45|
|Working temperature [˚C]||-20 do +120|
|Maximum working pressure [kPa]||400|
|Opening time / closing time [ms]||2,0/ 1,0|
|Suggested nozzle size||Ø 1,5; Ø 1,8; Ø 2,0; Ø 2,2; Ø 2,4; Ø 2,6
(can be drilled independently up to Ø 2.8 max.)
|Gas inlet – pipe stub [mm]||Ø 12|
|Gas outlet – pipe stub [mm]||Ø 6|
|Overall dimensions [mm]||125 x 60 x 44|
|Service life [km]
- in urban cycle
- in extra urban cycle
Standards and approvals:
STAG AC W02 injector has been approved under E8 approval No. E8 67R-01 7064, 110R-00 7065 and meets the requirements of UNECE Regulations.
|5x1,5 mm||4 pcs|
|9,5x1,8 mm||4 pcs|